|
Canada-AB-HANNA Azienda Directories
|
Azienda News:
- Mini 4 Pro Plus battery and RID - DJI Mavic, Air Mini Drone . . .
Anyway, flying the drone with the big battery in it then becomes flying like with any other drone with built in remote ID Obviously, if you fly the mini 4 pro without the bigger battery, the remote ID hardware goes away, and it become like flying any other sub 249g drone without remote ID
- DJI Mini 4 Pro RID w and w o Extended Battery? : r dji - Reddit
Remote Controller Firmware: v02 00 0300 (DJI RC 2) For the latest firmware as shown, how does this work? My understanding was that if you fly the drone with a regular battery it would disable RID If you fly it with a big battery it will enable RID Is this a "per flight" thing or once you use a big battery does it enable RID for good?
- DJI Remote ID Changes to DJI Mini 3 and DJI Mini 4 Pro: How . . .
DJI has since disabled remote ID on the DJI Mini 3 and Mini 4 Pro when using the Standard battery This would be the smaller-capacity battery that says 249 g on the outside This change does not affect the DJI Mini 3 Pro When flying with the larger-capacity battery (Plus battery), the Mini 3 or Mini 4 Pro will then broadcast Remote ID
- New firmware: RemoteID with regular battery? | DJI FORUM
Heres the problem If I fly the Mini pro 4 over an open air assembly, I need to have RID on and Prop Guards If I use the heavier battery with prop guards you have a disclaimer that the collision sensors are disabled and the weight of the aircraft cannot support the bigger battery with the prop guards
- So with the 4 pro mini with the 45 minute battery – Q A . . .
Now that it is registered, when you fly it, it needs to be running Remote ID, now even with the previous lighter battery (because it had to be registered) Now ehen you fly with the original smaller battery and the registered drone, you will need to purchase a Remote ID module to run when you are flying the smaller battery (Don't kill the
- Mini 4 Remote ID Question w Newest firmware : r dji - Reddit
Newest firmware update info says: Adds support for automatically activating Remote ID in the US only when the aircraft is used with an Intelligent Flight Battery Plus Just got my new Mini 4 Pro and am using it with RC-N2 (not the screen RC2) because my vision is not great and I can't see the 5 5" screen so I use my iPad
|
|