|
Canada-NS-TRURO Azienda Directories
|
Azienda News:
- DHCPv6 和 SLAAC 分别适合什么样的使用场景？ - 知乎
注意：slaac指的是路由器像下级终端（host）分配地址的方式，同理DHCPv6也是如此。 DHCPv6不仅可以分发IPv6地址，也可以包含DNS等信息，所以，DHCPv6就搞了两种方式： 无状态 + DHCPv6：地址由slaac获取，但是DNS由DHCPv6通告 有状态 + DHCPv6：地址和DNS都由DHCPv6通告。
- [ openwrt(x86) ] ipv6 的获取方式，有状态(DHCPv6) 无状态(SLAAC)，选择哪个好？
无状态SLAAC的后缀是根据MAC地址用EUI-64方式生成的（Windows还有个临时IPv6后缀是随机MAC用EUI-64生成的），MAC连续0的情况很少，生成后缀连续0的情况就少，简写不了所以是一长串；有状态DHCPv6分配的IPv6后缀是根据DUID自动分配或者手动指定的，中间有很多0，可以简写就很短，方便识别管理。OpenWrt里面
- 8. 2. 7 Check Your Understanding – SLAAC Answers - ITExamAnswers
8 2 7 Check Your Understanding - SLAAC Answers CCNAv7: Switching, Routing, and Wireless Essentials CCNA 2
- 8. 5. 3 Module Quiz – SLAAC and DHCPv6 (Answers) - ITExamAnswers
A SLAAC client can automatically generate an address that is based on information from local routers via Router Advertisement (RA) messages Once an address has been assigned to an interface via SLAAC, the client must ensure via Duplicate Address Detection (DAD) that the address is not already in use It does this by sending out an ICMPv6
- CCNA 2 v7. 0 Curriculum: Module 8 – SLAAC and DHCPv6 - ITExamAnswers
SLAAC The SLAAC method enables hosts to create their own unique IPv6 global unicast address without the services of a DHCPv6 server SLAAC, which is stateless, uses ICMPv6 RA messages to provide addressing and other configuration information that would normally be provided by a DHCP server SLAAC can be deployed as SLAAC only, or SLAAC with
- 小白对OpenWrt LAN口IPv6设置中无状态、有状态IPv6地址自动配置的一点理解和疑问
* 1：表示主机应当在该prefix范围内SLAAC自动生成IPv6地址，并配置子网路由条目、网关。 * 0：表示主机不应当在该prefix范围内SLAAC自动生成IPv6地址，但是可以配置子网路由条目、网关。 M-Flag：Managed address configuration flag 受管理地址配置标志
- CCNA 2 v7 Modules 7 – 9: Available and Reliable Networks Exam Answers
Explanation: ICMPv6 RA messages contain two flags to indicate whether a workstation should use SLAAC, a DHCPv6 server, or a combination to configure its IPv6 address These two flags are M flag and O flag When both flags are 0 (by default), a client must only use the information in the RA message When M flag is 0 and O flag is 1, a client
- 8. 5. 1 Lab – Configure DHCPv6 (Answers) - ITExamAnswers
Part 2: Verify SLAAC Address Assignment from R1; Part 3: Configure and Verify a DHCPv6 server on R1 Step 1: Examine the configuration of PC-A in more detail Step 2: Configure R1 to provide stateless DHCPv6 for PC-A Part 4: Configure a stateful DHCPv6 server on R1; Part 5: Configure and verify DHCPv6 relay on R2
- Dynamic Addressing for IPv6 GUAs Answers - ITExamAnswers
If Method 1 (SLAAC only) is used, the RA includes network prefix, prefix-length, and default-gateway information 2 Which dynamic addressing method for GUAs is the one where devices rely solely on the contents of the RA message for their addressing information?
- 【已解决】广东电信光猫拨号 ipv6 问题求助。-光猫 adsl cable无线一体机-恩山无线论坛
勾选了SLAAC，并关闭DHCP或者两个都勾选，都会导致爱快怎么配置ipv6都连不通，只有中继的情况下并访问爱快的IPV6地址才能通。原因应该是因为电信考虑的是直接连光猫的设备可以直接使用IPV6，而爱快下面的其他设备不是直接由光猫管理，所以ipv6无法连通。
|
|