|
- Difference between S-Mode and VAUTO mode - Aircurve - Apnea Board
Vauto is auto adjusting pressure with EPAP min, Max IPAP pressure and PS When EPAP plus PS equals IPAP in Vauto mode, the result is identical to S-mode In your example above, you could set EPAP min 11 0, IPAP max 18 0 and PS 4 0, and the device would provide auto-pressure between 15 11 and 18 14
- BIPAP Settings - ResMed AirCurve 11 Vauto | Apnea Board
Thank you for the input - I wasn't sure about the VAuto vs S mode since the Dr simply recommended BiPAP with pressure of 9 5 I will try the VAuto mode with high trigger tonight! Also attaching sleep study report - there was not a complete sleep study: this one is the BiPAP titration study the Dr ordered after reviewing the data from the
- Aircurve 11 vAuto issues - Apnea Board
The Aircurve 11 Vauto is a very good device, but is still intended to resolve obstructive sleep apnea and related issues If your dad has central apnea, the correct solution is a variation of bilevel called and adaptive servo ventilator, or Resmed Aircurve 11 ASV
- Resmed Aircurve 10 S mode to Vauto | Apnea Board
RE: Resmed Aircurve 10 S mode to Vauto If your O2 levels are under 88 for any length of time you would need to add oxygen to your Cpap You need to talk to your Doctor
- How to properly set VAuto clinician settings? | Apnea Board
I am inputting the IPAP EPAP PS, etc settings on my new ResMed AirCurve 10 VAuto (purchased through a private seller, 0 hours), and I am not sure what my settings should be set to The original prescription from last year's sleep study called for EPAP of 10 and IPAP of 15, and nothing else on the prescription
- Aircurve 10 VAuto settings recommendations | Apnea Board
First, learn about the settings called maxIPAP, minEPAP, and PS; and what they do Get those settings under control Forget about Flex and EPR, as none of that is relevant to the VAuto Also, I see signs of mouth-leaking between 4:20 am and 6:00 am You may want to try a chin strap And make sure your mask straps are adjusted well
- Vauto PRESSURES - Apnea Board
In OSCAR, the data is showing that I’m using a VAuto, but I’m actually using an AirSense 10 This might be because I’ve used the same SD card for both machines As you can see in the attached PDF, my flow rate looks terrible, even though the flow limitation graph appears fine
- Are the ResMed Aircurve 10 S and ResMed Aircurve 10 VAuto the exact . . .
The ResMed Aircurve 10 VAuto IS an auto adjusting machine, auto adjusting throughout the night between a minimum and maximum pressure allowing for a more comfortable night and better adherence to therapy
|
|
|