|
- Junos® OS Software Installation and Upgrade Guide
Use this guide for information relevant to upgrading Junos OS and related software: software packages, upgrading and downgrading Junos OS releases, system backup and recovery procedures, installing and upgrading firmware, storage media, zero touch provisioning
- [EX] Upgrading Junos on EX2300 and EX3400 - Juniper Networks
To upgrade Junos OS, copy the software package to the switch FTP HTTP server and use the command-line interface (CLI) to install the new software During a successful upgrade, the upgrade package removes all files from var tmp and completely re-installs the existing software
- JunOS : HowTO upgrade software on Juniper EX QFX MX series
Here is a step-by-step procedure how to upgrade the JunOS image on your Juniper EX, QFX or MX device You may get the JunOS software from the vendor, creating an account and adding your device serial number to it in order to access the software download
- Preparing for Software Installation and Upgrade (Junos OS)
Before you install or upgrade Junos OS, you must ensure some basic checks such as sufficient disk space availability and backing up configurations in place Table 1 provides links and commands for reinstalling Junos OS Insert your removable medium and reboot the system Log in as root Start the CLI Enter configuration mode: configure
- [QFX EX] Upgrading JUNOS OS a USB Device
Enter CLI on the Junos device by typing cli Upgrade the switch by using the Junos OS image from the above directory by typing request system software add <dir> <junos image> force-host reboot
- NEW Junos guides from the TechLibrary | Junos OS - Juniper Networks
The Juniper TechLibrary has just released some new guides to help you along your Junos journey: Junos OS Evolved Installation and Upgrade Guide; Getting Started with Junos OS Evolved; Introducing Junos OS Evolved; CLI User Guide for Junos OS Evolved; User Access and Authentication Administration Guide for Junos OS Evolved-----
- Installing and Upgrading Firmware | Junos OS | Juniper Networks
To upgrade the version of your firmware, complete the following steps: Run the show system firmware command to view the list of components installed on the router and the firmware version for each component version version PIC 0 CMIC LTC 2 0 1 0 1 0 OK
- Install Software via CLI (from Junos software copied to USB stick)
Follow these steps to install the software via the CLI from a USB stick: Download the Junos upgrade file to the USB stick Insert the USB device into the USB slot For example, slot 0 would return the following: Locate difference in the “before_USB txt” and “after_USB txt” outputs to locate drive label by using the “diff” command
|
|
|