|
- Neptune Apex 1Link - Explanation, please! | Reef2Reef
Hi Reefers! :beaming-face-with-smiling-eyes: Apologies for the apparent stupidity that's about to happen, but I can not wrap my head around how the 1Link module works I have found several descriptions across various vendors webpages such as "Module for Wireless connection from your Apex to
- DIY Apex 1Link Cable | Reef2Reef
A 1Link port has 2 lines for power and 2 for data That is the idea of 1link, 1 cable takes over for 2 Apex also has 24V DC with no control That is not 1link, it is just 24V DC The cable in the link above has the connector for Apex 24V on one end and bare wires on the other In the related products there is a 10' 1link
- The Neptune Systems Apex 1Link module - Possible accessory combos
The 1link still works if you need the extra 24V or 1link ports That module does require a power supply to be plugged in for the 1link module to supply the 24V
- Missing Wavs in Apex Fusion (help) | Reef2Reef
I disconnected then reconnected the Wav's and the Trident from the EB32's The Trident came back up but 3 of the 4 Wav's are still not working and showing as "missing" in Apex Fusion
- 24V DC Accessories Port VS 1 Link Ports on EB832 | Reef2Reef
No The 1Link ports are not like a regular DC24 Accessory port The 1Link ports do not show up as a controllable output, so you cannot create any programming to turn them On or Off like the regular DC24 Accessory ports The 1Link ports are essentially just another AquaBus port that happens to also carry 24v of power, but can only be used to connect approved 1Link devices which contain motors
- Neptune Dos in different room | Reef2Reef
The 4-pin port is only for using an optional 1LINK male-to-male cable to connect the DŌS to 1LINK module or EB832; that optional cable carries both power and Aquabus communications over that single cable instead of using a dedicated power supply and separate Aquabus cable
- Cannot connect 3 Neptune WAV pumps to EB832 | Reef2Reef
Slowly setting up 540g tank, been running smaller tank for couple years now I have THREE EB832 Energy Bars and 9 Neptune WAV pumps I am connecting WAV pumps via the THREE 1LINK ports on each EB832 I am not using separate 1LINK module All 3 WAV pumps are recognized on EACH EB832, but only
- Stay away from WAV, 1Link - pumps start to fail after 1 year.
Figured I let the community know - guys stay away from Neptune WAV pumps and the 1Link module Someone started a very nice thread on Neptune Community Forums, asking members who ran WAVs for more then a year Reports started coming in of the pumps starting to fail right between 1-2 years of use
|
|
|