- The RB Engines: 383 - 413 - 426 - 440 | Allpar Forums
The 440 V-8 features a deep-skirt engine block, rugged cast ductile iron crankshaft and aluminum-on-steel main and connecting-rod bearings for exceptional durability and smooth operation " B engines: 350, 361, 383, 400 • Max Wedge • 440 Six-Pack
- 440HP? - Allpar Forums
A 440-4 in a Chrysler was likely a standard 440 but the 440-4 in the GTX for example might have 5-15 more horsepower and was considered the HP 440 But some people would consider any 440 engine an HP engine so I'd take the seller's description with a grain of salt
- 77 440 heads? - Allpar Forums
that will tell you the year and etc of your 440 The Block Casting Number is what you have given All 440's and 400's from the start of the 1976 production year to the end of the 1978 production year used the same number 452 heads They are all the same part number from the 2 bbl 400 to a 4 bbl 440 This also applies if the 440
- Which Transmissions can go with my 440 Engine? | Allpar Forums
Yeah, the big block 727 and the A833 4 spd, the 3 spd was behind the 413 back in the early 60s, don't think it was ever offered behind the 440, but it could be one of those really rare options 68 Charger 440-6pac 63 TR4 95 Dakota 3 9-5spd 39 Nash Business Coupe, 2021 HR-V Honda (for the wife)
- Identifying a 440 engine - Allpar Forums
In the 440 years (late 60's early 70's) this plant built full size C bodies like Chrysler Newports, Dodge Monocos, and Plymouth Fury's Pretty much 100% your 440 was a non HP that came out of a car like that By the way, don't take this as a bad thing because the is absolutely no difference in HP non HP 440 blocks They are all good
- 440 Intake Questions - Allpar Forums
Hello, I have a 440 Mopar engine and was wondering about a few things on it I am wanting to put this engine in my barracuda to get it roadworthy again, but need an intake and carburetor first The intake manifold matches up with the screw holes and will bolt in nice, but there is a spot in the middle of the intake on both sides where there is
- 440 wont start when hot - Allpar Forums
1975 440 in an old Hot rod truck, motor runs good but after it gets hot, it will not crank No clicking or anything, the gauges move when the key is turned, that's all After about 45 minutes it will start fine I have replaced the starter 2 times and now have a Powermaster Mini on it
- 440-6 pack flooding - Allpar Forums
The other morning, cranked up my Challenger (440 - 6 pack, not stock) let it warm up for a minute, went to back it out and it choked out Tried to re-crank it, and it just kept turning turning A pop pop pop every few seconds, but not trying to start Smelled fuel, so let her sit for a few
|