- I²C - Wikipedia
Common I 2 C bus speeds are the 100 kbit s standard mode and the 400 kbit s fast mode There is also a 10 kbit s low-speed mode, but arbitrarily low clock frequencies are also allowed
- Speed - I2C Bus
The speed grades (standard mode: 100 kbit s, full speed: 400 kbit s, fast mode: 1 mbit s, high speed: 3,2 Mbit s) are maximum ratings Compliant hardware guaranties that it can handle transmission speed up to the maximum clock rate specified by the mode
- A Basic Guide to I2C - Texas Instruments
I2C has several speed modes starting with the Standard-mode (Sm), which is a serial protocol that operates up to 100 kilobits per second (kbps) This mode is followed by the Fast-mode (Fm) which tops out at 400 kilobits per second
- I2C Quick Guide - Analog
The I2C (inter-IC) bus is a 2-wire, multi-drop, digital communications link for ICs that has become the defacto standard for many embedded applications Serial, 8-bit, bidirectional data transfer can occur at speeds up to 3 4Mbps, though 400kHz is usually sufficient
- I2C Communication Protocol - GeeksforGeeks
I2C stands for Inter-Integrated Circuit It is a bus interface connection protocol incorporated into devices for serial communication It was originally designed by Philips Semiconductor in 1982 Recently, it is a widely used protocol for short-distance communication It is also known as Two Wired Interface (TWI) Working of I2C Communication Protocol It uses only 2 bi-directional open-drain
- Basics of the I2C Communication Protocol
The I2C communication protocol combines the best features of SPI and UART This guide will show you how it works in an easy to understand format
- All About the I2C Standard Protocol. How I2C Works | Circuit
There are also newer, faster versions of the I2C standard Fast plus mode tops out at 1 MHz while high speed mode can hit 3 4 MHz Ultra-fast mode is the newest kid on the block boasting speeds up to 5 MHz One important note is that older I2C devices won’t operate at the higher speeds
- I2C Communication - Wiring, Data Frame, Signal, and Speed
How I2C communication works, including Hardware Wiring, Data Frame (Packet), Bit Ordering, Signal, Speed Modes, and Software I2C (Bit Banging)
|