|
- How to add text in new autodesk fusion 360 - Autodesk Community
Step 1 Right click on the workplane or planar body face where you would like to place text Step 2 Left click select New Sketch Step 3 Select sketch Text as shown in @jhackney1972 a image File>Export and then Attach your * f3d file here if you can’t figure it out and someone will create a video using your actual file
- Create a void family to cut elements in projetcs - Autodesk Community
It cannot save down to 2015 But it is pretty straightforward I created a family based on the Face base generic model template, added a void extrusion, cut the solid with this void, and loaded the family into the project It will cut any host I pick to place the family on
- Solved: Upside down lighting fixtures - Autodesk Community
Place on face hosting will flip the fixture to the correct orientation in the Ceiling Plan Without using the reflected Ceiling Plan the best method is in an elevation view draw a reference plane from RIGHT to LEFT and name it and set the elevation
- Solved: Extruding at an angle? - Autodesk Community
I swear that in a prior version of Fusion 360, the Extrude command (in Model) had an angle manipulator that let you pick the extrusion direction Now it seems as though that is missing and right-angle extrusions are the only possible kind Am I imagining that?
- change hosted family to non hosted family - Autodesk Community
This way you can still use the different types that the face based family has Optional 2: Delete the ref plane extrusion you placed the fase-based family on (within the parent family) The nested face-based family won't need it anymore !\Important note: I'd reccommend to only deleting it if it causes you problems
- Solved: Reveals + Splitting Wall Surface - Autodesk Community
My problem was that I confused "Split Face" with the "Split Element" tool Select a Wall > select "Split Face" (icon looks like a 90's computer screen) > go to a corner and draw a singular, diagonal line > select "Finish Edit Mode" (Screenshot attached) Now, magically, the reveals separate the exterior face of the wall for materials to be applied
- Solved: Change Family Host Type - Autodesk Community
6 The Family is now converted to Face-Based and may be saved exported from this Project to a separate file for later use Note: Only certain Categories are available for Copy Monitor If the desired Family is not of one of these, you can edit the Family prior to this process and temporarily change it to an applicable Category and then change
- Solved: Problems with Offset Faces - Autodesk Community
At first the splitface operations where fast but got slower each time I then started dong the offset faces and that was very slow and got slower each time For the screencast I changed the process and do the offset face command immediately after after each split face That is worling well initially but seems to be slowing down again
|
|
|