Intermittently truck will not start, seems to be ICP related: Truck runs fine for awhile then maybe has a hard start after which it tends to not want to run again In Forscan, ICP is showing only 300ish psi but ICP_DES stays at 0 What Id noticed before was as soon as ICP_DES responded, the truck would start up and oil pressure tended to closely match
HELP!!! P2285 Code (Injector Control Pressure) sensor. . . As far as the p2285 code per the Ford diag manual -ICP signal circuit open -ICP disconnected -ICP signal shorted to ground -VREF circuit open -biased ICP sensor -ICP sensor -PCM Nothing about the IPR since this is an electrical circuit code If you're sure this is the only code then I would say the IPR is not the culprit