|
- LMC Truck vs. Classic Parts - SteelSoldiers
Overall LMC truck parts has been a great parts resource So much so, that NOW Classic parts addresses trucks I've never ordered from Classic, so I can't compare But I've been ordering stuff from LMC TRUCKS for well over ten years and NEVER had any problems EVER Again, NOT dissing Classic as I have zero experience with them
- LMC Quarter Panels?? | ClassicBroncos. com Forum
I don’t have any experience with the LMC Bronco stuff, but I’ve used plenty of their C-10 parts They are very hit or miss with fitment Rocker panels that are an inch too short Extra material bunched up behind the grille so the grille doesn't fit the fenders properly They are what they are Inexpensive imported pieces Some of it is
- LMC Truck weatherstripping | ClassicBroncos. com Forum
There was a thread a few days ago that mentioned the weatherstrip kit from LMC Truck for $180 I went to their website and couldnt find the kit I ordered a catalog, but it wont be here for a couple weeks My question is, what is included in this kit, how is the quality, and what is the part
- LMC Bronco Catalog - Lawndart’s truck! - ClassicBroncos. com Forum
Later, they came out, took pics of the Bronco and made the LMC cover in 2017 I have since moved and retired After looking, seems some photoshopping has been done
- LMC Truck Dash Cover - SteelSoldiers
My dash pad is in very bad shape (like most), when i checked with a local GM dealer to see how much a new one was, it was $675, so i looked at LMC Truck and i found this (Middle Product) LMC Truck Parts - Page 96 I worked great, it fits awesome, and is alot cheaper around $44 95
- factory tach install will it work? - SteelSoldiers
I just received this from LMC, it is a new item It matches good, the black is a little darker most likely due to age of other gages It was $129 and needs something to drive it I am using a Dakato digital ds1 module I have installed it in the cluster but not into the truck yet I am waiting on the small fuel gauge from LMC
- What are the preferred CUCV replacement seat covers?
LMC bucket seat covers don't fit and need a lot of custom work to get 'em to fit For $199 not a bad price It was my first 'do it yourself' upholstery job To clarify; the bottoms fit AOK I used contact cement on the recessed areas to get it to stay down in the contours The seat-backs are too wide at the top and too wide at the bottom
- CUCV (M1009) Headlight Issue - SteelSoldiers
I put in the LMC harness and the headlights ($60) with some middle of the road bulbs ($20) I am thrilled with the results, it blows my daily driver with $200 nightlux led bulbs out of the water For about $100 probably the best thing I've done to my 1009 other than the basic bullet proofing things these things need due to their particular
|
|
|