|
- word choice - Which is correct: pass-through or passthrough or . . .
Without anymore context it's hard to tell exactly what you need I would avoid using PassThrough unless you're actually using the Point Cloud Library's PassThrough filter, as it may get confusing If you're talking about actual filters, I would use Pass-Through Most signal processing filters are hyphenated (Low-Pass, High-Pass )
- How Does IP Passthrough Work? (And What is DHCPS-Fixed?)
I recently set up a new internet connection at home and my modem didn't support bridge mode Instead I had to use an option called "IP Passthrough" Here's some details on that modem configuration I've never heard of IP Passthrough before, and there's not much technical information about it in particular Here's the physical details of my modem:
- grammar - walk-through, walkthrough, or walk through? - English . . .
When or whether hyphen disappears depends more on whether a specialized use becomes generalized "Passthrough," for instance, has lost a hyphen, mostly because of a general use as a window-like opening from the kitchen If enough non-specialized speakers read walkthroughs, then the hyphen will eventually disappear A walk-through in the
- layer1 - SFP SFP+: Extender? F F panel passthrough? - Network . . .
Fiber will typically have passthrough connectors mounted in a box, where the horizontal cable is terminated on the back side You simply connect your patch cord (maximum of five meters for copper cabling) to the punchdown block, patch panel, fiber box, etc to connect to the horizontal cabling
- cisco asa - Meraki in Passthrough mode behind ASA - Network Engineering . . .
As it turns out, Passthrough Mode on Meraki will not work behind an ASA The Meraki will not forward traffic through the ASA, so TCP handshakes are broken, ie the VPN traffic sends SYN straight to the networked machine, but the networked machine responds back through the ASA, and the ASA drops the packets because it didn't get the first SYN
- Function of Pass through port on Access Point?
I have an Alcatel Access Point 1201H which has got 1 uplink gigabit port while 3 downlink ports Also there are two ports named "PT" which mean pass through ports
- Cat. 6 RJ45 pass through connector issues - networking
You should not be crimping plugs The sockets for the solid-core, horizonal cable are what you punch down and get to pass the category test suite, but you will never get homemade, stranded, patch cables using the plugs to pass the category test suite, which is why the ANSI TIA EIA 568 Commercial Building Telecommunications Cabling Standard disallows such cables and requires factory-built patch
- Connecting an ASA behind an AT T router gateway
I decided to use manual mode, as I felt that would make NAT for the DMZ easy There aren't a lot of options for manual IP passthrough - really I can only add the MAC address of the device being used (so I entered the MAC address of Eth0 0 on the ASA) But Eth0 0 on the ASA remains down down I have a few questions:
|
|
|