companydirectorylist.com  Global Business Directory e directory aziendali
Ricerca Società , Società , Industria :


elenchi dei paesi
USA Azienda Directories
Canada Business Elenchi
Australia Directories
Francia Impresa di elenchi
Italy Azienda Elenchi
Spagna Azienda Directories
Svizzera affari Elenchi
Austria Società Elenchi
Belgio Directories
Hong Kong Azienda Elenchi
Cina Business Elenchi
Taiwan Società Elenchi
Emirati Arabi Uniti Società Elenchi


settore Cataloghi
USA Industria Directories














  • rocket modeling 2025 | Rocketry Forum - Model Rocketry Forums
    Rocket Launcher, 200 Feet of Flight Altitude, Model Rocket Kits with Launch Set, Ultra-high Flying Rocket, Rocket Toy, Outdoor Toys for Ages 8-13, Birthday Gift for Kids Boys Girls Rceico $18 99 Estes Model Rockets Athena, Brown a Amazon com
  • Download OpenRocket designs - Model Rocketry Forums
    FWIW: The best way, IMO, is to start with one of the Open Rocket Examples, save it to your directory with a new name, and then start modifying it Measure the parts, weigh the parts and then input the data You'll start building a database of rocket simulations made by @Frausing and can start using those as your baselines
  • USCRPLs Aftershock II becomes Highest and Fastest amateur rocket of . . .
    Aftershock II has officially become the highest and fastest amateur rocket of all time! Following its successful launch and recovery on October 20, 2024, data from the on-board avionics unit was collected and analyzed to reconstruct the rocket’s flight path After a thorough internal review, the
  • OpenRocket: How to ignore stability issues? - Rocketry Forum
    I took a stable rocket that has a 565 ft apogee and changed the mass in the nose cone to 0 ounces Ran the simulation and the rocket became unstable with an apogee of 128 feet I changed the launch rod length to 7,200 inches long Then re-ran the simulation and the rocket is still unstable and it's apogee dropped to 127 feet? See attached ork file
  • Hybrid Rocket Build Thread - Model Rocketry Forums
    Hello everyone, I am currently in the process of building a HPR hybrid rocket motor and am posting to get opinions, advice, and help The motor has a theoretical average thrust of 800N 2 Propellant is paraffin wax with carbon black additive 3 Oxidizer is N2O I have already
  • Electronic Gyro Rocket Roll Stabilization System
    If used as a finished product ready for installation in a rocket, custom made or industrial servo motors would be used, gyroscope and electronics would be made according to COTS or MIL-STD standards to be able to meet the requirements required of one such rocket system The control algorithm is in fact an electronic rolleron Which works
  • Ideal Stability of a Rocket - Model Rocketry Forums
    for example here is a model with a 4 36 caliber of stability all three plots are showing an 8 mph wind (coming from the right) The first plot is launched straight up (launch angle=0) the next plot shows the rocket aimed downwind (LA= -10) Finally aiming the rocket +10 degrees into the wind is in the 3rd plot Note the differences in altitude!
  • Mid-Power Rocket | Rocketry Forum - Model Rocketry Forums
    Balsa Machining Service 3" School Rocket - best value in MPR rocketry Basic 29mm powered kit is $34 - fully optioned 5' rocket with payload bay and rail buttons is under $60 They also have a 24mm powered version but I'd go with the bigger motor - you can always adapt down Top quality made in USA parts and a super flyer




Annuari commerciali , directory aziendali
Annuari commerciali , directory aziendali copyright ©2005-2012 
disclaimer