|
- Uniform flow occurs when | Civil4M
Uniform flow occurs when (a) the direction and magnitude of the velocity at all points are identical (b) the velocity of successive fluid pai-ticles, at any point, is the same at suc¬cessive periods of time (c) the magnitude and direction of the velocity do not change from point to point in the fluid
- Uniform flow occurs when | Civil4M
Uniform flow occurs when (a) the flow is steady (b) the flow is streamline (c) size and shape of the cross section in a particular length remain constant (d) size and cross section change uniform¬ly along length (e) flow occurs at constant fate The correct Answer Is (c) size and
- A one dimensional flow is one which - Civil4M
A one dimensional flow is one which (a) is uniform flow (b) is steady uniform flow (c) takes place in straight lines (d) involves zero transverse component of flow (e) takes place in one dimension The correct Answer Is (d) involves zero transverse component of flow
- Work Procedure Specifications for Internal and External . . . - Civil4M
The pointing lines shall be regular and uniform in breadth and shall be finished flush, raised etc as specified The edges of the pointing shall be cut off parallel so as to leave well defined lines In recessed pointing, the mortar shall be struck off, with a trowel and the work left, showing the natural irregularities, in line and surface of
- Why we do PCC before footings? - Civil4M
The purpose of lean concrete is to provide the uniform Surface to the footings concrete and to avoid the direct contact of footings concrete from soil And also to protect foundation from percolation of water, moisture or alkaline salt water may attack concrete and weaken the footings foundations Hope you understand Best regards,, Syed Aslam
- Checklist for all kinds of tiling works including grouting . . . - Civil4M
Tiles of different boxes of same batch are mixed to ensure uniform tonality Ceramic tiles cured before placing when cement mortar is being used for tiling During Execution Checks: Is correct laying procedure followed (like leveling using rubber hammer and checking with spirit level etc) Is the spacing of tile maintained using specified PVC
- In Resource Leveling - Civil4M
In Resource Leveling - (a) Total duration Of Project is Reduced (b) Total duration Of Project is Increased (c) Uniform Demand of Resources is achieved (d) Cost of Project is Controlled The correct Answer Is (c) Uniform Demand of Resources is achieved
- Normal depth in open channel flow is the depth of flow corresponding to
Normal depth in open channel flow is the depth of flow corresponding to (a) steady flow (b) unsteady flow (c) laminar flow (d) uniform flow (e) critical flow The correct Answer Is (d) uniform flow
|
|
|