Using multiple USB devices with several TRACE32 instances The option NODE=<device_name> in the configuration file tells TRACE32 to connect with the specific ‘named USB device’ that you want The device name can be set in TRACE32 PowerView using the menu Misc > Interface Config or by calling the command IFCONFIG state from the TRACE32 command line
Lauterbach multicore debugging guide - STMicroelectronics There is a possibility to debug dual-core processor with single TRACE32 PowerView window, but for better orientation and easier debugging there is the possibility to start multiple PowerView windows The term Single Device Solution is used if one Lauterbach device is used to debug all cores
LAUTERBACH TRACE32 MANUAL Pdf Download | ManualsLib The command might be required in a multicore environment if you use multiple debugger instances (multiple TRACE32 PowerView GUIs) to simultaneously debug different cores on the same target system
TRACE32 Installation Guide - Lauterbach If you pass command line arguments, you can adapt the start and the environment of TRACE32 to your project-specific needs You can define a user-specific name and location for the configuration file and your own PRACTICE start-up script
T32Start - Lauterbach Defines the communication parameters between multiple TRACE32 PowerView user interfaces as well as the parameters to connect to TRACE32 PowerView using an external program via Remote API
Multicore Debugging Tracing | Lauterbach TRACE32 In this section you find seven examples of very successful and complex SoCs from different and well-known chip manufacturers - and your ideal TRACE32® configuration to debug and trace them easily and quickly
Lauterbach Support TRACE32 PowerView provides different display options for analyzing trace results on Symmetric Multi-Processing (SMP) systems The most suitable option depends on the target software and the user’s analysis goals
Trace 32 Manual - NXP Semiconductors If the connection between the Debugger and the TRACE32 system is not already set, a Load TRACE32 Driver dialog pops up and you can set yourself the path and name of the TRACE32 host driver program and the UDP port