|
Canada-0-PIPE Azienda Directories
|
Azienda News:
- What do these ALG setting on my router mean, and what is ALG?
12 "ALG" here stands for "Application-layer Gateway" That is, firewall modules which cope with some peculiarities of those protocols On a stateful firewall, the "state" is usually tied to just addresses and port numbers That is, you send a packet from port X to server's port Y, and the firewall automatically allows the reverse back in
- For better security, should I enable or disable these ALG firewall . . .
This is what it says Application Level Gateway (ALG) Configuration Here you can enable or disable ALGs Some protocols and applications require special handling of the IP payload to make them work with network address translation (NAT) Each ALG provides special handling for a specific protocol or application
- ipsec - Can someone help me understand ALG and VPN settings on my . . .
ALG - It is recommended to enable Application Layer Gateway (ALG) because ALG allows customized Network Address Translation (NAT) traversal filters to be plugged into the gateway to support address and port translation for certain application layer "control data" protocols such as FTP, TFTP, H323 etc
- Windows 10 service called AarSvc_70f961. What is it and how could I . . .
Information on this service is very scarce but there are a few mentions like this where the last part of the service seems to be a random hexadecimal number (AarSvc_xxxxxx) According to this, it is new to version 1903 Does anyone have any more information as to what it is, if it should be disabled and how it could be disabled?
- How do I figure out the display name of a Windows service from its . . .
The Event Viewer typically uses the service name as opposed to the display name PowerShell makes it easy to see both for each service (or a single service you specify) side by side: PS C:\> get-service | format-table servicename,displayname -autosize ServiceName DisplayName ----------- ----------- Alerter Alerter ALG Application Layer Gateway Service AppMgmt Application Management aspnet
- Why Do i See 2 Aarsvc services running in task manager
I Have Windoes 11 and when i go and check task manager there are 2 AarSvc services running AarSvc is stopped and a wierd like AarSvc_220ca0 is active please help me it wasn't there before i did not
- Port 21 is open but I cant connect to FTP server - Super User
0 Passive FTP helps if your client is behind a NAT gateway (or firewall) Active FTP helps if your server is behind a NAT gateway (or firewall) You can't be both active and passive on the same operation You can make this work if one of the two NAT gateways contains FTP ALG (Application-Layer Gateway) code to allow both active and passive FTP
- Setting up a public FTP server on an Access Point - Super User
Note that for this to work well, your NAT gateway router (in this case this is your mobile 4G router) must have what's known as an "FTP ALG" (Application-Layer Gateway)
- ip - Connecting from WAN to LAN - Super User
It helps if your NAT gateway has FTP "ALG" (Application-Layer Gateway) code that knows how to deal with an FTP server behind the NAT You see, when an FTP client is behind a NAT, using FTP Passive (PASV) mode can make FTP work through the NAT
- Not able to access FTP server from other machines in same LAN when . . .
Command Line Firewall (this section should fix the problem) Run the below in command line elevated as administrator to create a Windows Firewall rule allowing inbound traffic to your FTP server service to communicate on the applicable command and data ports for any IP address and any profile scope of Windows OS classified networks You need to specify the program="<C:\FTPServer\FTPServer exe
|
|